PROREND EIFS Adhesive System
External Wall Insulation Finishing Systems

ProRend External Insulation Finishing System, EIFS for short, is a complete external wall insulation system with a durable rendered finish.

This insulated render system is perfect for both new buildings and to renovate existing properties. ProRend EIFS is fantastic for all types of building, both residential and commercial. ProRend EIFS can be installed using an adhesive system, or a rail system.

Guide Price: £60-90/m2

ProRend EIFS Adhesive Overview

The ProRend EIFS adhesive system offers high thermal efficiency and a durable, long lasting finish. Utilising expanded polystyrene and mineral fibre insulation adhered to masonry substrates or backing boards, the ProRend EIFS adhesive system can achieve a range of u-values using different thickness's of insulation.

The ProRend EIFS adhesive system comes with a 10 year product guarantee against material failure.

The system is particularly suited to new build and renovation projects onto masonry backgrounds and backing boards where no cavity is required behind the insulation.

Features and benefits

  • Thermal efficiency – achieve u-values down to 0.15 W/m2K or less
  • Suitable for new build and renovation projects
  • Building regulation part B compliant
  • Building regulation part L compliant
  • Water tight façade
  • Breathable render system
  • Low maintenance

 

Ideal substrates

  • Solid brick/block walls
  • Lightweight blocks
  • Cavity walls
  • Concrete
  • Existing render
  • Timber and steel frame

Adhesive Starter Track

External wall insulation ProRend EIFS
Starter Track

  1. DPC Membrane
  2. ProRend EIFS starter track
  3. Fixings at 600mm centres maximum (5 per 2.5m length)

Starter Track Mitre Corner

  1. Mitre corner
  2. Fixing 50mm from corner

Adhesive Application

Adhesive Application

  1. 100% coverage of insulation panel using a 10mm grooved tiling trowel
  2. Insulation panels installed block bond
  3. Minimum stagger 150mm
  4. Mechanical fixings 10/m2 in each corner of panel and centre
Adhesive Application Diagram

Aperture Planning

Insulation Layout Around Apertures
  1. Minimum 150mm stagger of insulant joints
  2. Avoid vertical or horizontal joints at corners of apertures
  3. Cut insulation panels to fit around aperture corners
  4. Ensure suitable quantity of mechanical fixings used around aperture

Corner Detail

Insulation Corner Detail

  1. Ensure alternating blockbond at corner

Reveal Detail

  1. Insulation panels fitted around aperture to avoid horizontal and vertical joints at corners
  2. Face insulation panels fitted 20mm proud of blockwork at aperture
  3. 20mm insulation fillet fitted between face insulation and window frame to avoid cold bridge
  4. Joints in insulation fillet not coincident with joints in face insulation panels
  5. Adhesive bitumen sealtape fitted between insulation fillet and window frame to ensure watertight seal

Adhesive Reveal

Ventilation Services, Flue Pipe And Fixing Pattresses

Fixing Pattress

  1. Fixing pattress made of solid timber
  2. Maximum dimensions: 300mm x 300mm
  3. Thickness of pattress to match thickness of insulation
  4. Mechanically fixed back to substrate
  5. Avoid primary insulation joints within 150mm of fixing pattress
Ventilation Service

  1. Ventilation services fitted through centre of insulation panel without joints
  2. Avoid ventilation service at edge of insulation pane
Hot Flue

  1. Hot flue requires mineral fibre insulation (if primary insulant is EPS) around hot flue pipe
  2. Hot flue fitted through centre of insulation panel without joint
  3. For systems using EPS as primary insulant minimum distance of EPS from hot flue to be determined during system design
  4. Avoid hot flue at edge of insulation panel

Fire Barrier In EPS Adhesive

Adhesive Fire Barrier

  1. Mineral Wool Lamella insulation fitted at floor level between EPS insulation panels
  2. Fire barrier panels fitted block bond so joints alternate with EPS joints – minimum 150mm stagger
  3. Adhesive mortar used to rear of fire barrier panels
  4. Mechanical fixings used to secondary fix fire barrier panels to substrate
Fire Barrier Layout Between Adjacent Dwellings

  1. Stainless steel fire bead to thickness of insulation mechanically fixed to the substrate coincident with party wall of adjacent dwellings
  2. Flexible PVCu joints between adjacent fire beads

Mesh-coat Layout

Mesh Overlap Layout

  1. Minimum 100mm overlap between layers of mesh
  2. 300x300mm reinforcement squares at corners of apertures at 45&dec;
  3. Applied within 4-7mm ProRend Lite basecoat

Render Application

Following application of the insulation components of ProRend EIFS the decorative render system is applied:

  1. ProBead Noseless Meshed Angle beads to corners
  2. ProBead Window Protection Beads to window and door returns
  3. 4-7mm ProRend Lite mesh-coat with embedded ProMesh Grade 3 – see figure 24 above
  4. ProRend Colourtex Primer
  5. ProRend Colourtex Finish

Refer to ProRend brochure for application, technical details and CE markings of ProRend render products.

Tools

A wide range of tools and fixings are available which are used during the application of the ProRend EIFS system. Further details will be stated as part of the written documentation for the project.

ProRend EIFS Rasp
ProRend Finishing Spatula
ProRend Colourtex PVC Float

Sample U-value Calculation

Adhesive system renovation over typical rendered solid brickwork wall using 90mm EPS Platinum
ConstructionThickness, mLambda, W/mKR, m2K/W
External Resistivity0.04
ProRend Colourtex0.00150.7000.02
ProRend Lite0.00500.2700.02
ProRend EIFS EPS 70 Platinum0.09000.0303.0
ProRend Lite0.00500.2700.02
BS EN 12524 Render, Lime, Sand0.02000.8000.03
215m Brick Wall0.21500.7700.13
BS EN 12524 Gypsum Plastering0.01500.5700.03
Internal Resistivity0.13
0.3605R = 3.09m2K/W
U = 0.29W/m2K

† U value calculations according to BS EN ISO 6946

Most of the properties built before the1930's were constructed with solid walls that can benefit from the insulating properties of modern external wall insulation. Our ProRend EIFS is a great choice, offering high thermal effieciency with a choice of rendered finishes. For colour and finish options, see ProRend Colourtex.

We can also help you find an installer of external wall insulation in your area, so give us a call if you are renovating.

ProRend EIFS is a great choice for modern new builds, as it achieves clean lines and can follow curved surfaces. You or your architect can contact us for consultancy on design and to find installers.

SWIGA - Solid Wall Insulation Guarantee

SWIGA Guarantees are a 25 year insurance backed guarantees offering cover against defects in materials, workmanship and design.

The SWIGA guarantee is available as a separate guarantee to SAS (Europe) Ltd.’s own 10 year product guarantee and is supplied by SWIGA.

Criteria

  • The work must be completed be a SWIGA contractor member
  • The contractor carrying out the work must be PAS2030 certified
  • The installed system must belong to a SWIGA system certificate holder member
  • The installed system must be BBA certified
  • The property must be 4 stories or less
  • A fee of £79 plus VAT must be paid to SWIGA by the property owner

Installers Obligations

  • Installers must be registered with SWIGA
  • Installers must be trained by the system manufacturer
  • Installers must be PAS2030 certified
  • A minimum of one PAS2030 certified installer must be on site for every four uncertified installers at all times
  • Installers must submit a pre-notification form to SWIGA at least 5 working days before the installation start date
  • Work cannot commence until the installers have received authorisation from SWIGA
  • Installers must submit the application for the guarantee once the work is completed and the installation has been signed off by the system manufacturer

SAS (Europe) Ltd's Obligations

  • SAS must train the installers to PAS2030
  • SAS must issue installers with ID cards
  • SAS must endorse the installers application to become SWIGA registered
  • SAS must carry out a minimum of two ‘work-in-progress’ site inspections per year for each installer
  • SAS must advise SWIGA of the names of trained individuals



PROREND EIFS Products

Our Other Products